TP LINK CPE210, N300 Wireless 2.4GHz Outdoor MAXtream 9dBi CPE

specification

Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
RAM: 64MB DDR2 RAM, 8MB Flash
Interface: 1 10/100 Mbps protected Ethernet port (LAN0, passive PoE in)
1 grounding terminal
1 reset button
Power supply: passive power over Ethernet via LAN0 (+4.5 pin; -7.8 pin)
Voltage range: 16-27VDC
Power consumption: max. 5 watts
Note: When deploying using passive PoE, the power draw from the power source will be higher depending on the length of the connecting cable.
Dimensions (W x D x H) 224 x 79 x 60 mm
Antenna type: Built-in 9dBi 2x2 dual polarized directional antenna
Beam width: 65° (H-plane) / 40° (E-plane)
Note: Please refer to the data sheet for more information
Protection: 15KV ESD protection
6KV lightning protection
Contents: External ASA stabilized plastic material
IPX5 waterproof certification
wireless functions
Wireless standards: IEEE 802.11b/g/n (Pharos MAXtream disabled)
Proprietary protocol: TDMA mode (Pharos MAXtream enabled)
Wireless speed up to: 300 Mbps (40 MHz, dynamic)
Up to 144.4 Mbps (20 MHz, dynamic)
Up to 72.2 Mbps (10 MHz, dynamic)
Up to 36.1 Mbps (5 MHz, dynamic)
Frequency: 2.4-2.483 GHz
Note: Available operating frequencies may vary depending on restrictions in countries or regions where the device is used.
Transmission power: 25dBm/316mw (adjustable power by 1dBm)
Note: The maximum transmission power may vary in different channels depending on the restrictions of the countries or regions where the device is used.
Software features
Wireless configurations: Pharos MAXtream TDMA technology
802.11b/g/n modes
Selectable channel width: 5/10/20/40 MHz
Automatic channel selection
Transmission power control
Dynamic Frequency Selection (DFS)
WDS enable/disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, 64/128/152-bit WEP encryption
Enable/disable SSID broadcast
Multi-SSID with VLAN tagging (AP mode only)
Distance/ACK timeout parameter
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management: discovery and remote management via the Pharos Control app
HTTP/HTTPS web-based management
system log
SNMP agent (v2c)
Ping Watch Dog
Dynamic DDNS
SSH server
System Tools: Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmission CCQ/CPU/Memory
Monitors: Bandwidth/Stations/Interfaces/ARP/Routes/WAN/DHCP
spectrum analyzer
Speed ​​test
Ping
traceroot
System Level Optimization: Optimized for IGMP Snooping/Proxy Multicast applications
Hardware watchdog
Features of the POE adapter
Dimensions (W x D x H): 85.8×43.9×29.7 mm
Connects 1 AC jack to earth ground
1 10/100 Mbps Secure Ethernet port (power + data)
1 10/100 Mbps Secure Ethernet port (data)
Button Remote reset button
Power Status LEDs: Green
Input 100-240VAC, 50/60Hz
Output • V2.0: 24VDC, 0.6A max
• V3.0: 24VDC, 0.5A max
• V3.20: 24VDC, 0.25A max

+4, 5 pins; -7, 8 pins. (up to 60m capacity via Ethernet)
Efficiency >80%
Certificates: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
others
Certification CE, FCC, RoHS, IPX5
Package Contents: Outdoor Wireless CPE
24V 0.6A passive PoE adapter
Pole mounting straps
AC power cord
Installation guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend using one of the following web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Ambient working temperature: -40℃~70℃ (-40℉~158℉)
Storage temperature: -40℃~70℃ (-40℉~158℉)
Operating humidity: 10%~90% non-condensing
Storage humidity: 5%~95% non-condensing