TP LINK CPE610, 300Mbps Wireless 5GHzOutdoor MAXtream 23dBi CPE

specification

Processor Qualcomm 560MHz CPU, MIPS 74Kc
RAM 64 MB DDR2 RAM, 8 MB flash
Interface 1 10/100 Mbps Secure Ethernet port (LAN/POE)
1 reset button
Power supply Passive power over Ethernet via LAN (+4.5 pin; -7.8 pin)
Voltage range: 16-27VDC
Power consumption 7.41 W
Note: When deploying using passive PoE, the power draw from the power source will be higher depending on the length of the connecting cable.
Dimensions (W x D x H) 366 x 280 x 207 mm (14.4 x 11.0 x 8.1 inches)
Antenna gain 23 dBi
Antenna beam width 9° (azimuth), 7° (elevation)
Protection 15KV ESD protection
6KV lightning protection
Enclosure Material: External PC Stabilized Plastic
Weatherproof: IP65 waterproof and dustproof design
wireless functions
Wireless standards IEEE 802.11a/n
Proprietary protocol TDMA mode (Pharos MAXtream enabled)
Wireless speed up to 300 Mbps (40 MHz, dynamic)
Up to 144.4 Mbps (20 MHz, dynamic)
Up to 72.2 Mbps (10 MHz, dynamic)
Up to 36.1 Mbps (5 MHz, dynamic)
Frequency 5.15~5.85 GHz
Note: Available operating frequencies may vary depending on restrictions in countries or regions where the device is used.
Transmission power max. 25dBm (adjustable power in 1dBm)
Software features
Network Configuration WAN: Static/Dynamic/PPPoE/L2TP/PPTP
LAN: Static/Dynamic/DHCP
Forwarding: ALG/UPnP/Virtual Server/Port Trigger
Security: SPI Firewall/ Ping Denied/ DoS Protection
access control
static routing
Bandwidth control
IP & MAC mandatory
Wireless configurations Pharos MAXtream TDMA technology
Selectable channel width: 5/10/20/40 MHz
Automatic channel selection
Transmission current control
Dynamic Frequency Selection (DFS)
WDS enable/disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption,
64/128/152-bit WEP encryption
Enable/disable SSID broadcast
Multi-SSID with VLAN tagging (AP mode only)
Distance/ACK timeout parameter
Wireless MAC Address Filter
Wireless Advanced:
Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management discovery and remote control via the Pharos Control app
HTTP/HTTPS web-based management
system log
SNMP agent (v2c)
Ping Watch Dog
Dynamic DDNS
SSH server
System Tool Indicators: Signal Strength/Noise/Transmission CCQ/CPU/Memory
Monitors: Bandwidth/Stations/Interfaces/ARP/Routes/WAN/DHCP
spectrum analyzer
Speed ​​test
Ping
traceroot
System Level Optimization Optimized IGMP Snooping/Proxy for multicast applications
Hardware watchdog
Features of the POE adapter
Dimensions (W x D x H) 85.8×43.9×29.7 mm
Connects 1 AC jack to earth ground
1 10/100 Mbps Secure Ethernet port (power + data)
1 10/100 Mbps Secure Ethernet port (data)
Button Remote reset button
Power Status LEDs Green
Input 100-240VAC, 50/60Hz
Output 24VDC, 0.5A max
+4, 5 pins; -7, 8 pins. (up to 60m capacity via Ethernet)
Efficiency >84.29%
Certificates CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
others
Certification CE, FCC, IC, RoHS, IP65
Package Contents Outdoor Wireless CPE
24V 0.5A passive PoE adapter
Pole mounting straps
AC power cord
Installation guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend using one of the following web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Ambient working temperature: -40℃~70℃ (-40℉~158℉)
Storage temperature: -40℃~70℃ (-40℉~158℉)
Operating humidity: 10%~90% non-condensing
Storage humidity: 5%~95% non-condensing