TP LINK CPE220, 2.4GHz 300Mbps 12dBi Outdoor CPE

specification

Hardware characteristics
Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
RAM 64MB DDR2 RAM, 8MB Flash
Interface 1 10/100 Mbps Secure Ethernet port (LAN0, passive in PoE)
1 10/100 Mbps Secure Ethernet port (LAN1, passive PoE passthrough)
1 grounding terminal
1 reset button
Power Supply Passive Power over Ethernet via LAN0 (+4.5 pin; -7.8 pin)
Voltage range: 16-27VDC
Energy consumption max. 10.8 watts
Note: When deployed using passive PoE, power will be drawn from the power source
be a certain amount higher, depending on the length of the connecting cable.
Dimensions (W x D x H) 11×3.1×2.1 inches (276×79×60 mm)
Antenna type Built-in 12dBi 2x2 dual polarized directional antenna
Beam width: 60° (H-plane) / 30° (E-plane)
Note: Please refer to the data sheet for more information
Protection 15KV ESD protection
6KV lightning protection
Enclosure outer ASA stabilized plastic material
IPX5 waterproof certification
wireless functions
Wireless standards IEEE 802.11b/g/n (Pharos MAXtream disabled)
Proprietary protocol TDMA mode (Pharos MAXtream enabled)
Wireless speed up to 300 Mbps (40 MHz, dynamic)
Up to 144.4 Mbps (20 MHz, dynamic)
Up to 72.2 Mbps (10 MHz, dynamic)
Up to 36.1 Mbps (5MHz, dynamic)
Frequency 2.4~2.483 GHz
Note: Available operating frequencies may vary due to restrictions
About the countries or regions where the device is used.
Transmission power 30dBm/1000mw (adjustable power by 1dBm)
Note: The maximum transmission power may vary depending on the channel
Restrictions in countries or regions where the device is used.
Software features
Wireless configurations Pharos MAXtream TDMA technology
802.11b/g/n modes
Selectable channel width: 5/10/20/40 MHz
Automatic channel selection
Transmission power control
Dynamic Frequency Selection (DFS)
WDS enable/disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, 64/128/152-bit WEP encryption
Enable/disable SSID broadcasting
Multi-SSID with VLAN tagging (AP mode only)
Distance/ACK timeout parameter
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management discovery and remote control via the Pharos Control app
HTTP/HTTPS web-based management
system log
SNMP agent (v2c)
Ping Watch Dog
Dynamic DDNS
SSH server
System Tools wireless signal quality indicators:
Signal Strength/Noise/Transmission CCQ/CPU/Memory
Monitors: Bandwidth/Stations/Interfaces/ARP/Routes/WAN/DHCP
spectrum analyzer
Speed ​​test
Ping
traceroot
System-level optimization for optimized IGMP Snooping/Proxy Multicast applications
Hardware watchdog
Features of the POE adapter
Dimensions (W x D x H) 85.8×43.9×31.9 mm
Connects 1 AC jack to earth ground
1 10/100 Mbps/1000 Mbps Secure Ethernet port (power + data)
1 10/100 Mbps/1000 Mbps Secure Ethernet port (data)
Button Remote reset button
Power Status LEDs Green
Input 100-240VAC, 50/60Hz
Output 24VDC, 1.0A max
+4, 5 pins; -7, 8 pins. (up to 60m capacity via Ethernet)
Efficiency >80%
Certificates CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
others
Certification CE, FCC, RoHS, IPX5
Package Contents Outdoor Wireless CPE
24V 1A passive PoE adapter
Pole mounting straps
AC power cord
Installation guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,
MAC OS, NetWare, UNIX or Linux.
Note: We recommend using one of the following web browsers for advanced users
Experience: Google Chrome, Safari and Firefox. IE browsers are not recommended.
Ambient working temperature: -30°C~70°C (-22℉~158℉)
Storage temperature: -40℃~70℃ (-40℉~158℉)
Operating humidity: 10%~90% non-condensing
Storage humidity: 5%~95% non-condensing